sensotec

In a welded version, the level probe LMP 307 was the ideal choice for measuring fill levels of solvents and fuels. A new housing version makes it easier to mount and increases the level of resistance. BD|SENSORS is expanding its range to include new versions of the tried-and-tested level probe LMP 307. This model is the ultimate allrounder in the “Hydrostatic level measurement” discipline and for more than 20 years it has been reliably recording levels in clean and slightly contaminated liquids. The LMP 307 offers a persuasive choice with a wide range of available measuring areas, output signals, materials [...]

The new fine manometers G 1107 and manometer G 1113 from Greisinger feature outstanding speed, high resolution and highest accuracy measuring process. The handheld meters take the price-performance leadership, complemented by position-independent measuring in difficult access situations. The manometer G 1107 covers a very high-resolution range of up to +/- 200 hPa / 20 kPa, while its sister device G 1113 provides equally precise differential pressure measurements up to +/- 2000 hPa. In addition, there is the switchable FINE-Function, which enhances the resolution to an exceptional level. A further advantage of the high-performance chip-based MEMS sensor is the ability to [...]

Hot wire mass flow transmitter IP rating：IP54 Linear adjustment function Switching analog output by dip switch Off set function by button The housing and probe material are PC fire-proof FTS140 hot wire air velocity transmitter, using mass flow measuring principle, stable electrical bridge with good accuracy, simple structure, stable performance and low flow sensitivity. It is suitable for use in HVAC air conditioning environment measurement, optimization and adjustment of system performance, ventilation control. Duct type, easy installation, suitable is used extensively in environmental engineering projects, as facility and factory maintenance.

A SIMPLE SELECTION OF PROGRAM CONFIGURES US AUTOMATICALLY IN AND OUT Format 22 x 108 mm to install on rail 3 KV isolation between input / output / power Configurable process and temperature signals input 4-20 mA or 0/10 Vdc signal output selectable The C4F converter is a versatile element that can be applied as galvanic isolation for protection in case of ground or return problems. Its main application is the conversion of signals to introduce them into analog input cards, acquisition systems, control systems or PLC’s. The equipment is configured using two buttons, a simple two-digit display located under [...]

New Ultraflo U1000MKII-HM Clamp-on Heat Meter/Energy Meter. The New U1000MKII-HM is a “Best Value” Clamp-on, Ultrasonic heat meter alternative to traditional inline energy meters, for energy management and billing applications in domestic and commercial, district or shared heating or cooling systems. Offering significant installation cost and dry maintenance benefits over traditional inline products. The U1000MKII-FM is an ultrasonic permanent/fixed clamp-on flow metering solution for measuring flow rate and total flow with a volume pulse output and optional Modbus or 4-20mA flow proportional output, which can be used as a stand-alone meter or as part of an integral management system. Simple [...]

For continuous level measurement of liquids (even if polluted), mash and paste materials in open or closed vessels, sumps, open channels, drains, etc. Variants of level meter with adjustment by two buttons, or by magnetic pen Xi version for usage in explosive areas State indication by two LEDs Current output (4 ... 20 mA), voltage output (0 ... 10 V) or RS-485 Modbus output Wide choice of electric connection via connectors, cable glands or protective conductor Reception of reflected ultrasonic signal from level can be improved using horn adaptor The ULM® ultrasonic level meters are compact measurement devices containing an [...]

Signal calibrator TRX-021C has a multiple signal Output and measurement including voltage, current and thermoelectric couple with LCD screen and silicone keypad, simple operation, longer standby time, higher accuracy and programmable output. Features: Highly accurate within 0.1% of the DC voltage range for source and measure Source and measurement can be performed simultaneously. Loop power supply function (24 VDC) Sweep functions that allow 3 types of continuous outputs: Line out function Stepping out function Segmentation output(c/m) function Application: LAB Industrial field PLC Process Instrument Electric value Other area’s debugging

The flow switch of the FF series comes in different housing sizes in industrial high-pressure cleaning technology. For example, in industrial washing machines, car, truck or self-service car washes as well as in refrigeration or hydraulic applications. Robust and flexible The simple mechanical operating principle of the piston valve seat design means that it is practically maintenance-free in all applications. The volume flow raises a piston (fitted with a magnet) out from a valve seat against a spring force. The stroke causes a magnetic field change that actuates a hermetically isolated Reed switch and generates an electrical signal with the [...]

Non-contact discharge measurement opens new possibilities for use in process and waste water Launching its new SQ flow meter series SOMMER Messtechnik breaks new ground. Discharge monitoring in the fields of wastewater and industrial effluents has just become much easier as the new flow meter captures continuously and contact-free the flow rate of sewer systems, shafts, ducts, semi-filled pipes and other technical channels. Its main advantage: The flow velocity and the level can be measured without direct contact to the wastewater. This is achieved by using up-to-date radar and ultrasonic measurement technology. The discharge calculation of the sensor, which is [...]

This safety ohmmeter / megohmmeter was developed to carry continuity and isolation measurements on pyrotechnical elements where user safety is at stake. Two types of conditions define the user safety: Measurement conditions: - Measuring current much lower than the current of non-fire - Connection to the test line only for the activated period of measurement - Discharge of residual electrical charges Safety conditions: - No overshoot of maximum current even in case of instrument failure (electronics breakdown, internal short-circuit…) - Permanent self-checking of the instrument internal functions before connection to measurement channel The ohmmeter function is based on 4 wire [...]

The NEW HS-630 portable Vibration and Temperature Meter Kit has been designed for use as both an entry level and also a comprehensive vibration/temperature monitoring instrument for maintenance engineers across all types of industry. The kit consists of the compact vibration meter with a combined non-contact temperature measuring sensor aided by a laser locator beam, a hand held probe, a magnetic mount for more permanent installations, a protective carrying case, an instruction manual and battery charger for both mains and in-car use. The meter is microprocessor based and by selection of the controls can be easily set up to monitor [...]

Magnetic-inductive flowmeter for pipes DN 10 ÷ DN 1000. Cheaper solution without display in compact or separate version. ETHERNET / MODBUS TCP communication Main feathures: Displayless electronic unit Compact and separated version Wide range of process connections A lot of material choices of lining and electrodes IP68 protection in separate version with stainless steel sensor or housing Empty pipe detection Ethernet / MODBUS TCP communication Power supply over ethernet Applications: Water treatment Chemical industry Food industry Mechanical engineering Agriculture Power engineering