Inclination

One axis inclination devices

Measures the inclination according to the gravitational measure. Constituyen la versión electrónica de tradicional nivel de burbuja from the information facilitated by a sensor situated in the transmitter. The measurement is done in a static system and is the degree of inclination respect the device base (that is fixed to the measured system) and in the axis indicated by the same device. The output information is analogic (Vdc, mAdc) or digital (RS485 or data bus). We have available devices with multiple ranges with +/-5º and +/-90ºC (between completely vertical and completely horizontal).

Tri-axial inclination devices

Measures the inclination according to the gravitational measure. The measurement is done in a static system and is the degree of inclination respect the device base (that is fixed to the measured system) and in the axis indicated by the same device. The output information is analogic (Vdc, mAdc) or digital (RS485 or data bus) and independently provides us information about the X axis and the Y axis. We have available devices with multiple ranges with +/-5º and +/-90ºC (between completely vertical and completely horizontal).

Servoinclinómetros

They are inclination devices the most stables and accurate available in the market. Its operation is based on the feedback of a seismic element immersed in a dense liquid. This enables to have an excellent linearity and low thermal affect. Thanks to these exceptional characteristics, the servoinclinómetros can be used in areas where demands are highest, civil engineering and instrumentation of bridges and tunnels, foundries, control of melted metal containers, etc.