Float and by-pass levels

//Float and by-pass levels

Float and by-pass levels

It is a magnetic system of level measurement without direct contact with the fluid. It is installed in the lateral wall of the tank with access to its lower part or upper one. With the camera in contact with the fluid there is a magnetic float that activates the measurement scale in the outer. There are two basic systems: SRK9 system. The level is displayed by a pointer that moves jointly with the float along the scale. Visualisation system by flaps (D-16 or similar), the float activates an array de flaps (magnetic arrows) that rotates with the magnet. The float [...]

Float levels

The continuous measurement by means of a float is done thanks to the activation of an array of reeds situated consecutively in the inside of the immersor where the float moves. The microrruptores reed are placed in a circuit board inside the tube. The distance between reeds is 5 mm or 10 mm, and will define the resolution of the system. When the magnetic float moves through the inmersor, it activates the nearest contact. The mentioned contact is detected in the amplification electronics that generates an analogic signal proportional to the level situation. This system is highly reliable and is [...]